Hello Everyone,
I need some help. I've spent hours looking through previous solutions on this forum and just haven't found an answer for my situation. I have a 1.5 TB that copies fine, no errors. Then when I go to expand I get the "Expand Did not finish successfully" error.
Equipment: TiVo Premiere 4
Background: My house was struck by lightning a few weeks ago, and fried all the HDMI ports in my house. I used the replacement program from TiVo to get a new box, and keep my discounted monthly rate. I then transfered all the shows from the old box to the new box via my network. Then took both drives out of the TiVo's, and copied the new drive to my previously expanded 1.5 TB drive out of the old unit. Copy worked fine, expand gives me the error. Both Hard drives work fine in the TiVo. Previous expansion with the same drive for the now bad TiVo was completed on the same computer/motherboard and hard drive, and I had no problems.
Troubleshooting: I've taken the following steps: Run a Full HD scan with WD's utility of my 1.5 tb drive and a full scan of the new TiVo's drive with SeaTools. Both come back with no errors. I tried re-starting the whole process with no luck. I've also done KS57 and KS58 on both drives, then tried to re expand and even re copy and re expand, still got the same symptoms. I also tried the hdparm method described in another thread but that says "HPA setting seems invalid"
fdisk gives me:
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
hdparm -N /dev/sdb gives me:
dev/sdb:
max sectors = 18446744072344861488/2930277168(18446744072344861488?), HPA setting seems invalid
I need some help. I've spent hours looking through previous solutions on this forum and just haven't found an answer for my situation. I have a 1.5 TB that copies fine, no errors. Then when I go to expand I get the "Expand Did not finish successfully" error.
Equipment: TiVo Premiere 4
Background: My house was struck by lightning a few weeks ago, and fried all the HDMI ports in my house. I used the replacement program from TiVo to get a new box, and keep my discounted monthly rate. I then transfered all the shows from the old box to the new box via my network. Then took both drives out of the TiVo's, and copied the new drive to my previously expanded 1.5 TB drive out of the old unit. Copy worked fine, expand gives me the error. Both Hard drives work fine in the TiVo. Previous expansion with the same drive for the now bad TiVo was completed on the same computer/motherboard and hard drive, and I had no problems.
Troubleshooting: I've taken the following steps: Run a Full HD scan with WD's utility of my 1.5 tb drive and a full scan of the new TiVo's drive with SeaTools. Both come back with no errors. I tried re-starting the whole process with no luck. I've also done KS57 and KS58 on both drives, then tried to re expand and even re copy and re expand, still got the same symptoms. I also tried the hdparm method described in another thread but that says "HPA setting seems invalid"
fdisk gives me:
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
hdparm -N /dev/sdb gives me:
dev/sdb:
max sectors = 18446744072344861488/2930277168(18446744072344861488?), HPA setting seems invalid
Aucun commentaire:
Enregistrer un commentaire