I bought a new router and needed to re-configure the Tivo wireless N adapters. The first one went fine. The second kept throwing an error and appeared to reboot repeatedly (amber light to blue to amber to blue etc.)
I chatted with tech support, and they told me to try the power adapter from the working adapter. I did that. Same results.
Finally I decided to just plug the adapter into the Tivo and see what happens. It worked.
I didn't take note of the firmware on the adapter that worked right way, but the version on the one that gave an error is V1.1.E1 | Hardware version: FF03. I could find no way to update firmware. The help instructions say to go to http://ift.tt/1KvEqfs which just routes to a generic help site that has no information about firmware.
Should I ever need to update the settings on these adapters again, I'd like to get an actual success message instead of an error that allows it to still magically work.
I did do the "factory reset" procedures more than a dozen times.
I chatted with tech support, and they told me to try the power adapter from the working adapter. I did that. Same results.
Finally I decided to just plug the adapter into the Tivo and see what happens. It worked.
I didn't take note of the firmware on the adapter that worked right way, but the version on the one that gave an error is V1.1.E1 | Hardware version: FF03. I could find no way to update firmware. The help instructions say to go to http://ift.tt/1KvEqfs which just routes to a generic help site that has no information about firmware.
Should I ever need to update the settings on these adapters again, I'd like to get an actual success message instead of an error that allows it to still magically work.
I did do the "factory reset" procedures more than a dozen times.
Aucun commentaire:
Enregistrer un commentaire