jeudi 25 août 2016

Problems with Bolt wireless setup

I'm one of the Series 1 refugees, and I received my new 1T Bolts today. I'm working through guided setup and hit a problem with the wireless config.

My router is a Linksys WRT54G2.

I've got my SSID and password correct. I know because one time I missed entering the password and got an error that it couldn't connect to the router.

The error I'm getting is various wordings on "there is a problem" and the code N07. One of the screens provided a link to tivo.com/help/N02 which has a lot of information (that didn't help, yet).

There's basically two paths for the IP address:

1 - Automatically from a DHCP server
  • Do you need to use a DHCP client ID on your network? NO
  • There is a problem with your network router. (NO7)
2 - Let me specify a static IP address (values pulled from "ipconfig /all" on my laptop)
  • IP Address. 192.168.1.10 (the rounter starts at 1.100 for dynamic IPs)
  • Subnet Mask. 255.255.255.0
  • Gatewas Address. 192.168.1.1
  • Primar DNS address. 75.75.75.75 (Comcast)
  • Alternate DNS address. 75.75.76.76
  • There is a problem with the router on your home network. (N07)

I've rebooted the router and the Bolt as suggested. The router works fine as all the other computers/phones/etc can connect to it.

I haven't tried a LAN cable yet (not convenient) and would prefer to get the wireless working.

Any ideas?


Aucun commentaire:

Enregistrer un commentaire