I have a Series 3 (the one with the OLED display) and the drive is going out so I bought a new one. Put both the old and new drives in the PC an booted up my MFSLive 1.4 CD. I then either the following command:
backup -qTao -/dev/sda | restore -s 128 -zpi -/dev/sdb
then all I get is the listing of options for both the backup and restore commands.
What gives!?!?
I've used MFSLive1.4 with success before.
Both drives are mounted, the old TiVo drive as sda and the new blank drive as sdb (I watched them mount and can do an ls command on sda with success).
The drives are of the same brand and size so it's a simple copy, no expanding or anything like that.
backup -qTao -/dev/sda | restore -s 128 -zpi -/dev/sdb
then all I get is the listing of options for both the backup and restore commands.
What gives!?!?
I've used MFSLive1.4 with success before.
Both drives are mounted, the old TiVo drive as sda and the new blank drive as sdb (I watched them mount and can do an ls command on sda with success).
The drives are of the same brand and size so it's a simple copy, no expanding or anything like that.
Aucun commentaire:
Enregistrer un commentaire