MOCA Setup Question: Roamio with actiontec modem/router + 2nd wireless router

Here is my current setup

FIOS Actiontec Modem/Router ( ip 192.169.1.1) - FIOS Coax cable goes into it. Dumbed it. No DHCP. No wireless.



Netgear R7000 - (Fixed IP 192.168.1.2) - Ethernet wire from actiontec to this router. DHCP on. Wireless on. This distributes all the ip's.



TIVO Roamio - MOCA enabled.

TIVO Mini - MOCA enabled.





My prior setup was just actiontec doing dhcp and wireless and the Raomio and Mini connected via MOCA. This setup was working fine.



Few days back I connected the Netgear. Which handles wireless and DHCP. Dumbed the actiontec. No wireless or DHCP.

Problem with the setup is the Roamio cannot connect via moca and gives a network setup problem (N13).



Here are the MOCA settings static ip (192.168.1.18)

Gateway address (192.168.1.1). Tried 192.168.1.2 since netgear is technically the one giving out IPs but this too gives the same network setup error.



What am i missing here? Is my setup correct?

Don't mind going back to the actiontec distributing DHCP but just want to give this setup a try before I go back.



Thanks