Can't get a new WD Blue to boot

Hi all,

I used JMFS to image a new 2 TB WD Blue WD20EZRZ. The new drive will not boot. I get the "Welcome, powering up." Then when it goes to access the drive it re-boots. Some things I tried:

>I did this same thing a few years ago using JMFS to image the original drive to a 2 TB WD Green Power A/V.

>I also used JMFS to make a new 1 TB drive for a friend using my original as the source, that worked fine.

>I did use the original 320 GB drive to prep the new Blue drive.

>I ran the...

Can't get a new WD Blue to boot

Can't get a new WD Blue to boot