The Laff channel was added a couple of months ago in Denver to the ABC affiliate on 7-3
This weekend - this channel and only this channel - has started causing the TIVO to not respond to the remote randomly and occasional rebooting.
I though it was just the one machine, but realized it was happening to both of my series 3's and in talking with my parents they indicated the same issue is happening to them on their series 3 - they deleted the channel and all is fine.
They're ~20 miles south of me - closer to the transmitters on Lookout Mtn in Golden. So their signal would be stronger - but this is a sub-channel for the local ABC affiliate (they have 3 subs though they're not broadcasting on 7-4 anymore).
We're both OTA - no cable - and these are all Series 3 (OLED) Tivo's.
The Tivo stops responding to the remote - sometimes it recovers, sometimes it reboots. Happens during both live and recorded shows.
I've noticed the length on recorded shows will sometimes be incorrect.
Here's the diagnostic info - the only that appears off to me is the RS corrected?
7-3 - ABC - Laff channel Denver
Signal strength is 90%
Freq- 177000Khz
Modulation - 8-VSB
Connector type RF
signal source terrestial
cable card assoc - none
signal lock yes
program lock yes
search complete
SNR 29DB
Rs uncorrected - 0
RS corrected - 1733
Any ideas what the issue is that would be affecting TIVO's in different locations the same way for the same channel? At 29Db - it's not a hot signal - no pixelation or drop outs observed....
I ran a kickstart 54 - and it came back up in only a few minutes. Drive is relatively new. If it was the power source - wouldn't it be happening on any channel not just this one, and not on all three of these TIVO's?
Is it a TIVO issue or a station signal encoding issue?
I did go into the channel list and there are 2 7-3's listed (actually there are 2 of all the ABC sub channels listed) - both were checked....
KMGhDt3
KZCOLD3
would that create an issue? I've uncheck the KZCOLD3 to see if that stops the issues....
This weekend - this channel and only this channel - has started causing the TIVO to not respond to the remote randomly and occasional rebooting.
I though it was just the one machine, but realized it was happening to both of my series 3's and in talking with my parents they indicated the same issue is happening to them on their series 3 - they deleted the channel and all is fine.
They're ~20 miles south of me - closer to the transmitters on Lookout Mtn in Golden. So their signal would be stronger - but this is a sub-channel for the local ABC affiliate (they have 3 subs though they're not broadcasting on 7-4 anymore).
We're both OTA - no cable - and these are all Series 3 (OLED) Tivo's.
The Tivo stops responding to the remote - sometimes it recovers, sometimes it reboots. Happens during both live and recorded shows.
I've noticed the length on recorded shows will sometimes be incorrect.
Here's the diagnostic info - the only that appears off to me is the RS corrected?
7-3 - ABC - Laff channel Denver
Signal strength is 90%
Freq- 177000Khz
Modulation - 8-VSB
Connector type RF
signal source terrestial
cable card assoc - none
signal lock yes
program lock yes
search complete
SNR 29DB
Rs uncorrected - 0
RS corrected - 1733
Any ideas what the issue is that would be affecting TIVO's in different locations the same way for the same channel? At 29Db - it's not a hot signal - no pixelation or drop outs observed....
I ran a kickstart 54 - and it came back up in only a few minutes. Drive is relatively new. If it was the power source - wouldn't it be happening on any channel not just this one, and not on all three of these TIVO's?
Is it a TIVO issue or a station signal encoding issue?
I did go into the channel list and there are 2 7-3's listed (actually there are 2 of all the ABC sub channels listed) - both were checked....
KMGhDt3
KZCOLD3
would that create an issue? I've uncheck the KZCOLD3 to see if that stops the issues....
Aucun commentaire:
Enregistrer un commentaire