I think I posted this incorrectly on another thread. oops
I have a Series4 with Software version 20.4.7a-01-2-746 and only use it OTA. About 2 months ago I rescanned for new channels and it found a few new ones which include 16-1 thru 16-7. All are SD. All came in just fine, were selectable and watchable. I didn't try recording their content.
Recently, about 2 to 3 weeks ago, the 16-1 thru 16-7 and a few others cant be selected from the guide. I've tried another channel scan, repeated Guided Set-up, and reset and restarted completely, with no joy for those paticular channels. I have many distant channels that have a signal strength of 40 to 50 but display just fine with no pixalization. The channels in question have a signal strength of 55-62 but I get a bubble box that says "Problem with the signal on this channel. Trying again. (V53)". A call to TiVo support told me the problem was with the signal strength and they couldn't help.
I just found that if I just enter 16 that the 16-1 channel will display normally, but if I enter 16-1 or 16-2 etc. I get a black screen with the fault box.
Any help would be appreciated.
I have a Series4 with Software version 20.4.7a-01-2-746 and only use it OTA. About 2 months ago I rescanned for new channels and it found a few new ones which include 16-1 thru 16-7. All are SD. All came in just fine, were selectable and watchable. I didn't try recording their content.
Recently, about 2 to 3 weeks ago, the 16-1 thru 16-7 and a few others cant be selected from the guide. I've tried another channel scan, repeated Guided Set-up, and reset and restarted completely, with no joy for those paticular channels. I have many distant channels that have a signal strength of 40 to 50 but display just fine with no pixalization. The channels in question have a signal strength of 55-62 but I get a bubble box that says "Problem with the signal on this channel. Trying again. (V53)". A call to TiVo support told me the problem was with the signal strength and they couldn't help.
I just found that if I just enter 16 that the 16-1 channel will display normally, but if I enter 16-1 or 16-2 etc. I get a black screen with the fault box.
Any help would be appreciated.
Aucun commentaire:
Enregistrer un commentaire