Bought a Bolt and a Mini, and I'm trying to create a MoCA network for the Mini. I have no idea why it's not working. All I know is that the MoCA Details on the Bolt say "Link status: Down," and the Mini can't connect during guided setup. I have never used MoCA before and have no client devices other than the Mini.
I have the Bolt connected to the coax (for TV service) and via ethernet to a gigabit switch which is connected (also via ethernet) to an Airport Extreme router, which is connected (again by ethernet) to Comcast's cable modem. Bolt gets TV channels and internet service with no problems.
The coax is split in my living room, one leg to TiVo and one leg to router. The input to that splitter itself comes from an amplified split in the basement, from which another leg goes to the room with the mini in it.
Any reason that I've described so far, why this shouldn't work?
Bolt doesn't give any errors when trying to set up the network but it says link status is down.
I have the Bolt connected to the coax (for TV service) and via ethernet to a gigabit switch which is connected (also via ethernet) to an Airport Extreme router, which is connected (again by ethernet) to Comcast's cable modem. Bolt gets TV channels and internet service with no problems.
The coax is split in my living room, one leg to TiVo and one leg to router. The input to that splitter itself comes from an amplified split in the basement, from which another leg goes to the room with the mini in it.
Any reason that I've described so far, why this shouldn't work?
Bolt doesn't give any errors when trying to set up the network but it says link status is down.
Aucun commentaire:
Enregistrer un commentaire