mardi 21 avril 2015

Roamio 2TB HD Stuttering - Need to Clone or Transfer Shows to New HD

First - I searched other threads and they discuss the issue I am facing, but the people have older TiVos and are upgrading to a Roamio or if a drive is failing and someone wants to copy it, it is also on an older TiVo.

Back Story - I have new Roamio Plus (30 days old) and right when it arrived I swapped out the 1TB drive and put in a 2TB WD AV-GP drive. I transferred all of my programs from two existing TiVo HDs (which took forever!) to the Roamio and was off and running. That is until about 3 weeks in I started getting pixelation in my recorded programs, but not on live TV. I should have run a diagnostic test on the drive before installing it, but it is louder than it should be and with the pixelation I figure it is likely failing. I was within my 30day of having the drive so I have a replacement being sent free of charge.

My Issue - I have about 700GB of programming on the still working 2TB hard drive that I want to put on the new drive that will be arriving and I don't know the best way to go about it. I definitely don't want to pay for a month of service on one of my TiVO HD units and transfer the programs onto it and then back again to the new drive once it arrives. That would take WAY too long.

I have seen that people have used ddrescue and I saw this guide (http://ift.tt/1EpjRQj) that seems like something I could do using my PC, but it does not seem like people have used this with Roamio units much. I think it would be the easiest solution.

I have also read a bit about using kmttg and then copying all the programs from my Roamio to my PC (pull) and then setting up the PC to be seen by the Roamio once I install the new HD and have the Roamio pull all the programs from my PC onto the new HD. Does that sound correct? Would I keep all the program information doing it that way rather than pushing the info to the Roamio from my PC.

What is the best way to go about this?


Aucun commentaire:

Enregistrer un commentaire